Pak'ntainer - For front or rear loader collection vehicles
[ Specifications | Literature (Adobe Acrobat PDF)]
Marathon's Pak'ntainer® (MPT): Available in 3, 4, 5, and 6 Cubic Yard Front Load and 6 Cubic Yard Rear Load Models.
Marathon's Pak'ntainer is a portable and economical self-contained compactor/container with a remote power pack. It's designed for compacting and containing wet or dry waste and simplifying waste dumping. The Pak'ntainer helps maintain a sanitary environment, while saving money, for those generating as little as 20 cubic yards of refuse a week.
Place Pak'ntainer wherever needed, whenever needed... temporarily or permanently... no anchoring, no concrete pad, no special surfaces required. Can be used alone or to "fill the gap" in combination with other units. The container is tapered to achieve superior compaction ratios and aid waste ejection eliminating excessive wear and tear on collection trucks. Liquid-tight construction helps insure sanitary environment. Drain allows water to be removed lowering disposal costs.
Added Value Features
- Extra Low 42" Feed Height for convenient loading from side or rear of unit.
- Large 46"x22 1/2" Clear Top Opening handles even large, bulky items.
- Cycon Control System (for use with 3 phase only) eliminates all pressure and limit switches, dramatically improves cold weather performance and reduces maintenance costs and down time.
- Fixed Breaker Bar Teeth help keep materials in container and charge box clear.
- Hydraulic Plumbing To Both Sides With Quick Release Disconnects for added versatility in any application.
- Tri-Voltage Standard for easy conversion to 208, 230, or 460 volt power.
- Single Phase 110 with 3/4 HP Motor available at no additional charge.
- Heavy Duty Hinges for durability.
- Lockable Panel Box to increase security.
Optional Features Available:
- Hopper Enclosures
- Security Chute
- 90 Gallon Cart Dumpers
- Ozone Generator
Structural Dimensions:
| Model | A" | B" | C" | D" | Weight (lbs) |
|---|---|---|---|---|---|
| MPT-6 RL | 148 1/2 | 78 | 84 1/4 | 42 | 3,400 |
| MPT-3 FL | 78 7/8 | 81 3/4 | 59 1/4 | 42 | 2,600 |
| MPT-4 FL | 84 7/8 | 81 3/4 | 65 1/4 | 42 | 2,700 |
| MPT-5 FL | 90 7/8 | 81 3/4 | 71 1/4 | 42 | 2,800 |
| MPT-6 FL | 96 7/8 | 81 3/4 | 77 1/4 | 42 | 2,900 |
RL = Rear Load FL = Front Load
| Specifications: | ||
|---|---|---|
| Total Capacity | 3, 4, 5 or 6 cy | 2.3, 3.1, 3.8 or 4.6 m3 |
| Compactor Capacity | 0.5 cy | .4 m3 |
| Clear Top Opening | 46"W x 22 1/2"L | 1168mm x 572mm |
| Ram Face Size | 48"W x 20"H | 1219mm x 508mm |
| Model | 3cy FL | 4cy FL | 5cy FL | 6cy FL | 6cy RL |
|---|---|---|---|---|---|
| Total | 2600 lbs. | 2700 lbs. | 2850 lbs. | 2950 lbs. | 3400 lbs. |
| Weights | 1179 kg | 1225 kg | 1293 kg | 1338 kg | 1542 kg |
| Lift | 2300 lbs. | 2400 lbs. | 2550 lbs. | 2650 lbs. | 3100 lbs. |
| Weights | 1043 kg | 1089 kg | 1157 kg | 1202 kg | 1406 kg |
FL = Front Load, RL = Rear Load
| Performance Characteristics: | ||
|---|---|---|
| Cycle Time | 28 s | 28 s |
| Force | 19,800 lbf | 88 kN |
| Ram Face Pressure | 20.6 psi | 142 kPa |
| Ram Penetration | 3 1/2" | 343 mm |
| Electrical & Hydraulic Equipment: | ||
| Motor | 3 hp | 2.24 kW |
| Pump | 3 gpm | 11.4 L/min |
| Pressure | 2400 psi | 166 bar |
| Cylinder Bore | 2 1/2" Ø | 64 mm |
| Cylinder Rod | 1 1/4" Ø | 32 mm |
| Cylinder Shaft | 18 1/2" L | 470 mm |
| Reservoir | 5 gal | 19 liters |
Pictures on this page are illustrative only. Specifications are subject to change without notice to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards.