Pak'ntainer - For front or rear loader collection vehicles

[ Specifications | Literature (Adobe Acrobat PDF)]

Marathon's Pak'ntainer^® (MPT): Available in 3, 4, 5, and 6 Cubic Yard Front Load and 6 Cubic Yard Rear Load Models Marathon's Pak'ntainer® is a portable and economical self-contained compactor / container with remote power pack, is designed for com-pacting and containing wet or dry waste and simplifying waste dumping. The Pak'ntainer® helps maintain a sanitary environment, while saving money, for those generating as little as 20 cubic yards of refuse a week. Place Pak'ntainer® wherever needed, whenever needed... temporarily or permanently... no anchoring, no concrete pad, no special surfaces required. Can be used alone or to "fill the gap" in combination with other units. Container is tapered to achieve superior compaction ratios and aid waste ejection which eliminates excessive wear and tear on collection trucks. Liquid-tight construction helps insure sanitary environment. Drain allows water to be removed lowering dis-posal costs.

Added Value Features

• Extra Low 42" Feed Height for convenient loading from side or rear of unit.
• Large 46"x22 1/2" Clear Top Opening handles even large, bulky items.
• Cycon Control System (for use with 3 phase only) eliminates all pressure and limit switches,
  dramatically improves cold weather performance and reduces maintenance costs and down time.
• Fixed Breaker Bar Teeth help keep materials in container and charge box clear.
• Hydraulic Plumbing To Both Sides With Quick Release Disconnects for added versatility in any application.
• Tri-Voltage Standard for easy conversion to 208, 230, or 460 volt power.
• Single Phase 110 with 3/4 HP Motor available at no additional charge.
• Heavy Duty Hinges for durability.
• Lockable Panel Box to increase security.

Optional Features Available:

• Hopper Enclosures
• Security Chute
• 90 Gallon Cart Dumpers
• Ozone Generator

Structural Dimensions:

Model	A"	B"	C"	D"	Weight (lbs)
MPT-6 RL	148 1/2	78	84 1/4	42	3,400
MPT-3 FL	78 7/8	81 3/4	59 1/4	42	2,600
MPT-4 FL	84 7/8	81 3/4	65 1/4	42	2,700
MPT-5 FL	90 7/8	81 3/4	71 1/4	42	2,800
MPT-6 FL	96 7/8	81 3/4	77 1/4	42	2,900

RL = Rear Load FL = Front Load

Specifications:
Total Capacity	3, 4, 5 or 6 cy	2.3, 3.1, 3.8 or 4.6 m3
Compactor Capacity	0.5 cy	.4 m3
Clear Top Opening	46"W x 22 1/2"L	1168mm x 572mm
Ram Face Size	48"W x 20"H	1219mm x 508mm

Model	3cy FL	4cy FL	5cy FL	6cy FL	6cy RL
Total	2600 lbs.	2700 lbs.	2850 lbs.	2950 lbs.	3400 lbs.
Weights	1179 kg	1225 kg	1293 kg	1338 kg	1542 kg
Lift	2300 lbs.	2400 lbs.	2550 lbs.	2650 lbs.	3100 lbs.
Weights	1043 kg	1089 kg	1157 kg	1202 kg	1406 kg

FL = Front Load, RL = Rear Load

Performance Characteristics:
Cycle Time	28 s	28 s
Force	19,800 lbf	88 kN
Ram Face Pressure	20.6 psi	142 kPa
Ram Penetration	3 1/2"	343 mm
Electrical & Hydraulic Equipment:
Motor	3 hp	2.24 kW
Pump	3 gpm	11.4 L/min
Pressure	2400 psi	166 bar
Cylinder Bore	2 1/2" Ø	64 mm
Cylinder Rod	1 1/4" Ø	32 mm
Cylinder Shaft	18 1/2" L	470 mm
Reservoir	5 gal	19 liters

Pictures on this page are illustrative only. Specifications are subject to change without notice to accommodate improvements to the equipment. Certified in compliance with ANSI Regulation Z245.2, all OSHA standards, and certified under WASTEC's Stationary Compactor Certification Program. Products must be used with safe practice and in accordance with said regulations and standards.